Journal Publications

  1. S. Siddharth, S. L. Tsai, Y. B. Chen, M. T. Lee*, "Opto-thermo-fluidic Transport Phenomena involving Thermocapillary Flow during Laser Microfabrication." International Journal of Heat and Mass Transfer (2020) accepted, (SCI)

  2. X. C. Lo, J. Y. Li, M. T. Lee*, D. J. Yao, "Frequency Shift of a SH-SAW Biosensor with Glutaraldehyde and 3-Aminopropyltriethoxysilane Functionalized Films for Detection of Epidermal Growth Factor." Biosensors (2020) 10 (8), 92  (SCIE) [invited paper]

  3. Y. H. Chen, F. Y. Shih, M. T. Lee, Y. C. Lee, Y. B. Chen, "Development of lightweight energy-saving glass and its near-field electromagnetic analysis." Energy (2020) 193, 116812 (SCI)

  4. K. R. Pyun, Y. Jung, M. T. Lee, S. H. Ko, "A review on investigation of graphene thermal property: Recent development in measurement techniques." Multiscale Science and Engineering (2019) 1-13 (Springer)

  5. W. K Chen, J. C. Huang, Y. C. Chen, M. T. Lee, J. Y. Juang, "Deposition of highly transparent and conductive Ga-doped zinc oxide films on tilted substrates by atmospheric pressure plasma jet." Journal of Alloys and Compounds (2019) 802 (25) 458-466 (SCI)

  6. C. K. Yang and M. T. Lee*, "An optimization analysis of cooling channel design in a CNC lathe spindle system." Journal of the Chinese Society of Mechanical Engineering (2019) 40 (3) 231-238  (SCI)

  7. M. J. Gu, M. T. Lee, C. H. Huang, C. C. Wu, and Y. B. Chen*, "Synchronous scattering and diffraction from gold nanotextured surfaces with structure factors." Journal of Quantitative Spectroscopy and Radiative Transfer (2018) 210 165-172 (SCIE)

  8. C. J. Lan, S. L. Tsai, M. T. Lee*, "Direct silver micro circuit patterning on transparent polyethylene terephthalate film using laser-induced photothermochemical synthesis." Micromachines (2017) 8 (2) 32 (SCIE) [invited paper, featured on cover]

  9. H. Nakajima, D. Lee, M. T. Lee, C. P. Grigoropoulos, "Hydrogen production with CuO/ZnO nanowire catalyst for a nanocatalytic solar thermal steam-methanol reformer." International Journal of Hydrogen Energy (2016) 41 (38) 16927-16931 (SCI)

  10. Y. H. Huang, C. W. Huang, Y. D. Chou, C. C. Ho, M. T. Lee*, "An experimental and numerical study of the thermal issues of a high-speed built-in motor spindle." Smart Science (2016) 1-7 (Scopus) [thesis award invited article] 

  11. K. S. Yang, W. T. Ding, C. T. Yeh, M. T. Lee*, C. C. Wang. "An experimental and analytical investigation of the photo-thermal-electro characteristics of a high power InGaN LED module." Applied Thermal Engineering, 98 (5) (2016) 756-765  (SCI)

  12. S. L. Tsai, Y. K. Liu, H. Pan, C. H. Liu, M. T. Lee*. "The coupled photothermal reaction and transport in a laser additive metal nanolayer simultaneous synthesis and pattering for flexible electronics." Nanomaterials, 6 (2016) 12 (SCIE)

  13. A. K. Sekone, Y. B. Chen, M. C. Lu, W. K. Chen, C. A. Liu and M. T. Lee*. "Silicon nanowires for solar thermal energy harvesting: An experimental evaluation on the trade-off effects of the spectral optical properties." Nanoscale Research Letters 11 (1) (2016) 1-8 (SCIE)

  14. C. F. Tseng, T. Y. Tsai, Y. H. Huang, M. T. Lee*, R. H. Horng. "Transport phenomena and the effects of reactor geometry for epitaxial GaN growth in a vertical MOCVD reactor." Journal of Crystal Growth  432 (2015) 54-63 (SCI)

  15. A. K. Sekone, Y. Y. Hung, C. T. Yeh, M. T. Lee*. "Experimental study and analysis of porous thin plate drying in a convection dryer." International Communications in Heat and Mass Transfer 68 (2015) 200-207 (SCI)

  16. J. Kwon, H. Cho, H. Lee, S. Hong, Y. D. Suh, H. Moon, D. Kim, J. Cho, M. T. Lee, J. Yeo, S. H. Ko. "Facile photoreduction process for ZnO/Ag hierarchical nanostructured photoelectrochemical cell integrated with supercapacitor." ECS Journal of Solid State Science and Technology  4 (12) (2015) 424-428 (SCI)

  17. K. S. Yang, T. Y. Yang, C. W. Tu, M. T. Lee*. "A novel flat polymer heat pipe with thermal via for cooling electronic devices." Energy Conversion and Management  100 (2015) 37-44 (SCI)

  18. Y.K. Liu, Y.Y. Sie, C.A. Liu, M.T. Lee*. "A novel laser direct writing system integrated with A&F XXY alignment platform for rapid fabrication of flexible electronics." Smart Science 3 (2) (2015) 87-91 (Scopus) [thesis award invited article]

  19. J. Yeo, G. Kim, S. Hong, J. Lee, J. Kwon, H. Lee, H. Park, W. Manoroktul, M. T. Lee, B. J. Lee, C. P. Grigoropoulos, S. H. Ko. "Single nanowire resistive nano-heater for highly localized thermo-chemical reactions: Localized hierarchical heterojunction nanowire growth." Small 10 (24) 5014 (2014) (SCI) [featured on cover]

  20. Y. K. Liu and M. T. Lee*. "Laser direct synthesis and patterning of silver nano/microstructures on a polymer substrate."  ACS Applied Materials & Interfaces 6 (2014) 14576-14582 (SCI)

  21. K. S. Yang, C. H. Chung, C. W. Tu, C. C. Wong, T. Y. Yang, M. T. Lee*. “Thermal spreading resistance characteristics of a high power light emitting diode module.” Applied Thermal Engineering 70 (1) (2014) 361-368 (SCI)

  22. C. H. Chung, K. S. Yang*, K. H. Chien, M. S. Jeng, M. T. Lee*. “Heat transfer characteristics in high power LED packaging.” Smart Science 2 (1) (2014) 1-6  [thesis award invited article]

  23. M. T. Lee*, C. P. Grigoropoulos and R. Greif. “A Study of the transport phenomena in a wall coated micro steam methanol reformer.” International Journal of Hydrogen Energy 39 (2014) 2008-2017 (SCI)

  24. C. Chen, J. T. Teng, C. H. Cheng, S. Jin, S. Huang, C. Liu, M. T. Lee, H. H. Pan and R. Greif. “A study on fluid flow and heat transfer in rectangular microchannels with various longitudinal vortex generators.” International Journal of Heat and Mass Transfer 69 (2014) 203-214 (SCI)

  25. K.S. Yang, C. H. Chung, M. T. Lee, S. B. Chiang, C. C. Wong, C. C. Wang. “An experimental study on the heat dissipation of LED lighting module using metal/carbon foam.” International Communications in Heat and Mass Transfer 48 (2013) 73-79 (SCI)

  26. J. Yeo, S. Hong, D. Lee,  N. Hotz, M. T. Lee,  C. P. Grigoropoulos, S. H. Ko. “Next generation non-vacuum, maskless, low temperature nanoparticle ink laser digital direct metal patterning for a large area flexible electronics.” PLoS ONE  7 (8): e42315 (2012) (SCI)

  27. D. Lee, H. Pan, A. Sherry, S. H. Ko, M. T. Lee, E. Kim, C. P. Grigoropoulos. “Large-area nanoimprinting on various substrates by reconfigurable maskless laser direct writing.” Nanotechnology 23 (2012) 344012 (SCI)

  28. C. Kullmann, N. C. Schirmer, M. T. Lee, S. H. Ko, N. Hotz, C. P. Grigoropoulos, D. Poulikakos. “3D micro-structures by piezoelectric inkjet printing of gold nanofluids.”Journal of Micromechanics and Microengineering 22 (2012) 055022 (SCI)

  29. M. T. Lee*, D. Lee, A. Sherry and C. P. Grigoropoulos. “Rapid selective metal patterning on polydimethylsiloxane (PDMS) fabricated by capillarity-assisted laser direct write.” Journal of Micromechanics and Microengineering 21 (2011) 095018 (SCI)

  30. T. Xu, N. Zhao, F. Ren, R. Hourani, M. T. Lee, J. Y. Shu, S. Mao, B. A. Helms. “Sub-nanometer porous thin films by the co-assembly of nanotube subunits and block copolymers.” ACS Nano, 5 (2) (2011) 1376-1384 (SCI)

  31. M. T. Lee*, M. Werhahn, D.J. Hwang, N. Hotz, R. Greif, D. Poulikakos, C.P. Grigoropoulos. “Hydrogen production with a solar steam-methanol reformer and colloid nanocatalyst.” International Journal of Hydrogen Energy. 35 (2010) 118-126 (SCI)

  32. N. Hotz, R. Zimmerman, C. Weinmueller, M. T. Lee, C. P. Grigoropoulos, G. Rosengarten, D. Poulikakos. “Exergetic analysis and optimization of a solar-powered reformed methanol fuel cell micro-powerplant.”Journal of Power Sources,195 (2010)1676-1687 (SCI)

  33. M. T. Lee*, D.J. Hwang, R. Greif and C.P. Grigoropoulos. “Nanocatalyst fabrication and the production of hydrogen by using photon energy.” International Journal of Hydrogen Energy, 34 (2009) 1835-1843 (SCI)

  34. J. S. Suh, M. T. Lee, R. Greif, C.P. Grigoropoulos. ”Transport phenomena in a steam-methanol reforming microreactor with internal heating.” International Journal of Hydrogen Energy, 34 (2009), 314-322 (SCI)

  35. M. T. Lee*, R.Greif, C.P.Grigoropoulos, H.G.Park, F.K.Hsu. “Transport in packed-bed and wall-coated steam-methanol reformers.”Journal of Power Sources,166 (2007)194-20 (SCI)

  36. J. S. Suh, M. T. Lee, R. Greif, C.P. Grigoropoulos.  “A Study of steam methanol reforming in a microreactor.” Journal of Power Sources, 173 (2007) 458-466 (SCI)

  37. N. Hotz, M. T. Lee, C.P. Grigoropoulos, S. M. Senn, D. Poulikakos. “Exergetic analysis of fuel cell micropowerplants fed by methanol.” International Journal of Heat and Mass Transfer, 49 (2006) 2397-2411 (SCI)


  1. 李明蒼、劉建宏 「用於製造導電結構的反應墨水以及製造導電結構的方法」中華民國專利
  2. 李明蒼、陳政雄、何志成、洪名杰 「可改善熱誤差之工具機」中華民國專利
  3. 李明蒼、陳政雄、陳仕杰、高慶昌、楊昌儒「可即時監控溫度之3D列印裝置及其溫度監控方法」中華民國專利
  4. 李明蒼、劉建宏、周揚登、唐瑋辰、謝鎮洋、楊詠任「冷卻裝置及使用其對加工機主軸進行冷卻之方法」中華民國專利

© iMT Lab

Dept. of Power Mechanical Engineering

National Tsing Hua University